Designing Access Control

In a traditional wired access control deployment, a door controller is connected back to either a (non-IP) network controller or a building controller. The door controller typically handles two card readers, so it can regulate one or two doors, depending on whether one door is using a card reader for both entrance and exit. It would typically control three devices: a door contact (which tells the system if the door is opened or closed), the door lock and a card reader. Above the door frame would be a powered junction box, which powers each of the devices.

Security systems are now being designed across networks, and are using TCP/IP protocol to communicate to remote devices. Access control is no exception.

In IP-based systems, there is a direct network connection to either the door controller or the card reader, with the network connection providing low-voltage power, typically called Power Over Ethernet (POE). POE powers the door contact, the lock, the card reader and the request to exit (REX) device.

One of the most critical issues in designing access control or any network infrastructure is ensuring the right power source equipment is selected for the job. Many POE network switches do not have full POE capability to every port. When specifying a certain POE switch, make sure it provides the maximum POE wattage of out every port. The current standard is 15.4 watts; however, a new standard of POE plus is being developed, which will provide a maximum wattage of 30 watts.

One excellent example of an IP-based access control system is MAXxess’ netEDGE door controller. The NetEDGE is a high-performance, single-door controller that features a Linux operating system. The Linux OS is embedded in the netEDGE and greatly enhances the reliability and capability of the security management system. In addition, it provides several features to improve performance in any size application.

Because the netEDGE utilizes POE, separate power supplies and multi-door controllers are no longer needed. When utilizing POE for the controllers, readers, lock and REX power, a reduction in installation costs of at least 25% can be realized.
For more information on MAXxess’ netEDGE products, go to http://www.maxxess-systems.com/ or email me at ddamron@sagetechs.com.